Beper RI.420 Manual De Instrucciones página 13

Warming pad Use instructions
DESCRIPTION OF PARTS
1. Heating pad
2. Buttons
3. Electric contacts
4. Control
HOW TO USE
It is a practical, lightweight heated PAD. The outer cover is made of soft polar fleece and can easily
be removed for washing, also in a washing machine at temperatures up to 30 °C.
Never place the control on the pad or cover it when in use, as it can overheat.
Please observe following instructions for use:
1. Fully open the pad, avoiding folds that could damage the fabric.
2. Make sure the power socket is close enough to the position where the appliance is used, so the
control can be easily plugged in and used without the risk of anyone tripping over the power cord.
3. Check the control is switched to OFF, then plug the power cord of the control into the socket
(230V/50Hz).
4. Make sure that the cord is not twisted.
5. Never use non-original controls. Use the control supplied. Do NOT use without the control.
HOW TO USE THE CONTROL
Press ON/OFF button and hold for 3 seconds from position 0 to one of the 6 possible positions to
switch the heated pad on:
1 = low temperature (minimum)
2-5 = medium temperature
6 = high temperature (maximum).
Turn the switch to position 6 to heat the pad quickly: the pad will reach a comfortable temperature in
just a few minutes. Then turn the switch to the desired temperature.
Press TIMER button to select 45 or 90 minutes heating function. At the of this period heating pad
switch off automatically.
Press and hold for 3 seconds ON/OFF button to turn the pad off.
WARNING!
DO NOT LEAVE THE SWITCH IN POSITION 6 FOR LONG PERIODS OF TIME.
If you intend to use the appliance for a long time, set the control to the minimum temperature (1).
The heated pad should be placed over the area to be treated, never under the weight of the body,
for safety reasons.
For best results, keep the heating pad covered to avoid heat dispersion when the power is turned
off.
The pad has a safety system to prevent the risk of overheating, maintaining a constant set tempe-
rature by turning the appliance on and off at regular intervals.
The maximum temperature the appliance can reach complies with the requirements of European
electrical safety standards.
The manufacturer shall not be held liable for any damage to objects and/or harm to persons caused
by incorrect use.
IMPORTANT – Always unplug the appliance after using it.
13