Publicidad
Idiomas disponibles
Idiomas disponibles
Product Safety Information
Intended Use:
These Sanders are designed for smoothing and sanding paint, berglass, wood and body ller.
For additional information, refer to Product Safety Information Manual Form 04580387.
Manuals can be downloaded from ingersollrand.com
Product Speci cations
Free
Speed
Model
rpm
311A
12,000
† K
= 3dB measurement uncertainty
pA
‡ K
= 3dB measurement uncertainty
wA
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a speci c tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that speci c application.
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-o , to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16577231 and table on page 2. Maintenance frequency is shown in a
circular arrow and de ned as h=hours, d=days, and m=months of actual use. Items identi ed as:
1. Air lter
2. Regulator
3. Lubricator
4. Emergency shut-o valve
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand O ce or Distributor.
80156649_ed7
Pad Diameter
inch
mm † Pressure (L
6"
152
WARNING
Sound Level dB(A)
(ISO 15744)
) ‡ Power (L
p
84.3
95.3
* K = Vibration measurement uncertainty
6.
Thread size
7.
Coupling
8.
Safety Air Fuse
9.
Oil
EN
Vibration m/s²
(ISO 28927)
)
Level
*K
w
32.3
5.6
EN-1
Publicidad
