Descargar Imprimir esta página

Royal Sovereign ARP-900M Manual Del Propietário página 10

Acondicionador de aire portatil
Ocultar thumbs Ver también para ARP-900M:

Publicidad

Idiomas disponibles

Idiomas disponibles

Setting
mode/function
Press MODE button to select required working mode: automatic, cooling, fan or heating,
(heating is only available for units ARP-900DE
and ARP-900DM).
The indicator of your selected mode will be lit.
Auto mode is factory preset at 75 degrees. When in auto mode(auto and cool light illuminated) the temp up and temp down buttons are
disabled and you cannot set a desired temperature.
If you want a desired temperature
above or below 75 run unit in cool mode and set your
desired temperature
by pressing the temp up or temp down buttons.
Setting
temperature
Press the 'Temperature
up' or 'Temperature
down' button to regulate the temperature desired.
The display window will show the temperature
which you have set as you press the 'Temperature
up' or 'Temperature
down' button.
Otherwise,
it will always show the ambient temperature.
The preset temperature
of this machine is: 75 °F/24
°C / for cooling, 68 °F / 20 °C for heating.
Setting
ventilation
speed
1. Press the SPEED button to choose the ventilation
speed needed, high or low. The indicator of high or low
ventilation
will light up at the same time.
2. If the unit is in AUTO mode, it will choose the ventilation speed automatically
according to the ambient temperature
(the related
indicators will light up: at this time, the speed switch is invalid).
Setting
timer
1. Press the TIMER button to set the operating hours desired (1 to 12 hours, the timer
indicator will light on).
When the set time has been reached, the machine will turn oft
automatically.
The display window will show the hour(s) you set as you
press the TIMER button. If the timer button is not pressed, the unit will work continuously.
2. By pressing the timer but without turning on the other functions, you can PRESET the time for the machine to start.
For example, if you press the timer to '2', the unit will start automatically
after 2 hours.
All the above functions can also be performed with the supplied remote control.
The remote control requires 2 AAA batteries to operate.
FIG.19

Publicidad

loading

Este manual también es adecuado para:

Arp-900dmArp-900eArp-900de