Publicidad
Idiomas disponibles
Idiomas disponibles
Ifyou wish t ooperate the unit without the need t oempty the water tank, please:
• Remove
the drain k nob a nd rubber plug a nd retain for f uture u se.
• Connect
the drain t ube supplied
tothe water outlet asshown and locate the
other end into adrain.
• The drain t ube may b eextended
byadding anextension
tube and using a
suitable connector.
Please note
1.The drain m ust beatorbelow t he outlet level.
2.Flashing
comp
/ 'full water' indicator will not function in this mode of drainage.
3. If you want to extend the water tube, you can connect it with another tube
(OD: .7"/18mm)
Caution
for heating
function:
While using the heating function, please note:
1. In heat mode the exhaust MUST be exhausted to the outside just as in air conditioning
mode. The unit works in reverse of air conditioning
mode with the warm air out the front
and cold air is exhausted out the back.
2. Fix the drainage to be a continuous one (i.e. drain the water by water tube).
3. Working range for heating function is 41°F - 80.6°F (5° - 27 °C) and for the
cooling function, it is 64°F - 89°F (18°C - 32 °C).
For temperatures
outside of this range, the unit will not work properly.
FIG.23
_
....
FIG.25
/
J
J
Publicidad
