Descargar Imprimir esta página

Bosch HMV 5051 U Instrucciones De Instalación página 28

Publicidad

Idiomas disponibles

Idiomas disponibles

28
4. Insert the two remaining self-aligning screws through outer top cabinet holes.
Turn two full turns on each screw.
5. Tighten center screw completely.
6. Tighten the outer two screws completely to the top of the microwave oven.
Note:
While tightening screws, hold the microwave oven in place against the wall
and the top cabinet
7. Install grease filters by sliding them into the side slots, then pushing up and
toward oven to lock.

Publicidad

loading