cecotec READY WARM 800 THERMAL CONNECTED Manual De Instrucciones página 8

This product is not suitable for primary heating purposes. This
product is only suitable for well insulated spaces or
occasional use.
SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the product.
Keep this instruction manual for future reference or new users.
• Make sure that the mains voltage matches the voltage
stated on the rating label of the appliance and that the wall
outlet is grounded.
• This product is designed only for household use. Do not use
it for industrial or commercial purposes.
• Check the power cord regularly for visible damage. If the
cable is damaged, it must be replaced by Cecotec's official
Technical Support Service to avoid any danger.
• This symbol means "do not cover".
• WARNING: to avoid overheating, do not cover the
appliance. Do not use for heating clothes.
• Unplug the cord from the power supply after switching off
the appliance. Do not pull the cord.
• Do not let the cord touch the heater while in operation.
• Do not place the appliance close to heat sources, flammable
substances, or wet surfaces where it could fall or be thrown
into water, nor allow it to come into contact with water or
other liquids. Do not use outdoors.
• Always use the appliance on a horizontal and stable surface
with the heating panels in a vertical position.
• The appliance must not be placed immediately below a
socket.
• The product's surface will reach high temperatures during
operation. Avoid contact between the skin and the device.
8
READY WARM 800 /1200 / 1800 / 2000 / 2500 THERMAL CONNECTED