Craftsman professional 172.27675 Manual Del Operador página 14

TO REMOVE AND EMPTY DUST BAG (See Fig. 4 and 4a)
1, Unplug the sander.
A WARNING:
Failure to unplug the sander could result in accidental starting J
causing possible serious personal injury.
I
2. Locate (2) tab connectors on either side of vac adapter/dust bag assembly and squeeze.
Pull assembly straight back and off of dust exhaust I_ole (',seeFig. 4).
3. Turn dust bag assembly counterclockwise (embossed arrows show unlock and lock
rotation) and remove bag from vac adapter (see Fig. 4a, 4b).
Dust
Exhaust Hole
7
VacAdapter DustBag
withDualDust
Assembly
Ports
for ON
Fig. 4a
Counterclockwise
OFF
Dust Bag
Assembly
Vac Adapter
with Dual Dust
Ports
Fig. 4b
Dust Bag
Assembly
I
.
5.
Empty bag by shaking aggressively until completely empty. Wipe dust and debris from
the vac adapter.
Reattach the bag assembly onto the vac adapter, and reattach vac adapter and
dust bag assembly onto the sander.
NOTE: Empty dust bag frequently when sanding so dust collection system
works properly.
I
14