Settings 2; D/A Converter Operation Setting; Pcm Gain Setting; Remote Control Operation Setting - Esoteric Grandioso D1X Manual Del Usuario

Settings 2

D/A converter operation setting

DACM>***
Use this to set the D/A converter operation mode . Select the sound
setting you prefer .
By default, the setting is M1 .
M1
Algorithm 1
M2
Algorithm 2
M3
Algorithm 3

PCM gain setting

PCMG>***
Use this to set the gain for PCM signal playback . This can be used to
reduce the volume difference between PCM and DSD signal play-
back . Set it as necessary .
By default, the setting is 0dB .
0dB
The gain is not adjusted .
-3dB
The gain is reduced 3 dB during PCM signal playback .
-6dB
The gain is reduced 6 dB during PCM signal playback .
16

Remote control operation setting

REMOTE>***
Use this to set signal reception from ESOTERIC remote controls
included with the Grandioso P1X and other products .
By default, the setting is OFF .
o Regardless of this setting, remote control DIMMER buttons will
function .
o Set this to OFF when you are using an ESOTERIC amplifier . If set to
ON, the amplifier will be operated at the same time .
OFF
This disables control of this product using the buttons on the
remote control .
ON
This enables control of this product using the buttons for amplifier
control on remote controls .
The following table shows the correspondence between remote
control and unit buttons .
Remote control Grandioso D1X
SETUP button MENU button
INPUT buttons INPUT button
VOLUME (+/−) buttons Setting adjustment (−/+) buttons

MQA updating

MQA_UPDATE>***
Use to update the MQA signal processing program .
See the explanation included with the update program for details
about how to update .