Walser 16774 Instrucciones De Uso página 9

→ Do not use the seat cushion near naked flames or other sources of heat such as strong sunlight.
→ Check the seat cushion regularly for wear and tear. If such signs are present, or the seat cushion has been
improperly used or is no longer functioning, do not use it any more. Return the seat cushion to the dealer.
5.1 Fitting the seat cushion
Warning
Risk of injury!
Incorrect mounting of the seat cushion can lead to injuries.
→ Attach the seat support and the connection cables in such a way that the rider's freedom of movement is
not restricted.
→ The connection cable and the control unit of the seat support can cause a risk of entanglement, strangulati-
on, tripping or stepping if they are not arranged correctly. The user must ensure that excess sills and electrical
cables are arranged in a safe manner.
Using the seat mat in the car
• Place the car massage mat [4] on the car seat.
• Be sure to check that the car massage mat does not cover any airbag and thus obstruct it.
• Fasten the car massage mat to the backrest of the car seat with the fastening straps [5] (see fig. A, C).
• Make sure that the connection cable is not pinched anywhere.
• Insert the 12V plug [2] into the 12V on-board power socket.
• Only use the car massage mat when the engine is running to avoid discharging the vehicle battery.
Using the seat mat at home
• Place the car massage mat [4] on a suitable chair or armchair.
• Carefully secure the car massage mat with the fastening straps [5].
• Insert the power plug of the mains adapter [3] into the mains socket.
5.2 Operating the seat support & selecting the programme
• Switch on the automatic massage mat by pressing the „PWR" button [a] on the remote control [1].
• Now select the desired massage function by pressing the respective key. There are 4 massage zones [d], 5 massage
programmes [c] and 4 intensity levels [b] available.
• The „TIMER" key [e] can be used to set the automatic switch-off function after 15, 30 or 60 minutes.
• Switch off the automatic massage mat by pressing the „PWR" key [a].
• Then pull the 12V plug out of the 12V on-board power socket or the mains plug out of the power socket.
6. Cleaning
Notice
Risk of short circuit!
Water entering the covering may cause a short circuit.
→ Never immerse the seat cushion in water.
→ Make sure that no water enters the seat cushion.
Notice
Risk of damage!
Improper handling of the seat cushion can lead to damage.
→ Do not use aggressive cleaning agents, brushes with metal or nylon bristles, as well as sharp or metallic
cleaning items such as knives, hard spatulas or similar. These can damage the surfaces.
→ Do not put the seat cushion in the washing machine.
• Before cleaning, disconnect the 12V plug from the 12V on-board power socket or the mains plug from the main socket.
• Allow the seat cushion to cool down completely.
• Wipe the seat cushion with a slightly damp cloth.
• Allow all parts to dry completely.
7. Maintenance
There is a fuse in the 12V plug to protect the vehicle electrical system. Check and replace the fuse when the seat cushion
stops working.
• Unscrew the screw cap counter-clockwise from the 12V connector.
• Remove the connector tip.
• Remove the fuse.
• Place a new glass tube fuse (3A250V) on the coil spring.
• Replace the connector tip on the new fuse.
• Turn the screw cap clockwise onto the 12V connector.
8. Storage
• Allow the seat cushion to cool down completely.
• Store the seat cushion in a clean and dry place.
• Store the seat cushion so that it is not accessible to children.
• Do not allow the seat cushion to become buckled during storage as a result of heavy objects being placed on top of it.
• Do not weigh the seat cushion down with heavy objects.
9