Qilive Q.3509 Manual De Instrucciones página 5

4. USAGE
1. ON/OFF power switch
Off / Wired Mode: Switch off the gaming mouse in wireless mode.
Wired mode: Connect the provided USB-C cable to USB port on the computer.
Eco Mode: Switch to wireless power saving mode (roller light off and logo light on).
ON / Wireless mode: Switch to wireless mode with all LED lights on.
2. Connecting the Mouse
Plug the USB receiver into a USB port on the computer. The computer will recognize the
receiver and install the driver automatically.
3. Charging
Plug in the provided USB-C cable to the USB-C port of mouse, connect the other end of
USB-C cable into the USB-A port, the color of the wheel and logo indicating lights turns
green and last for 10 seconds.
Charging time: 1.5-2 hours. After the mouse is fully charged, the indicating lights change to
orange and lasts about 10 seconds.
4. Change DPI
The default DPI for the mouse is 1200. Click the DPI switch repeatedly to change the
setting in the following order: 800→1200→2400→3200→5000→10000.
5. DRIVER SETTING
Download the driver from https://support.auchan.com, install the driver.
Note: Please make sure this mouse is already connected to computer when setting the
functions in the driver.
A. Key Settings
The home page is the "Keys" setting interface, you can click to set functions on the right
module. Click "Apply" to complete setting.
5
EN