Pahlen Jet Swim Athlete Manual De Instrucciones página 12

Jet Swim Athlete
Product Description
Jet Swim Athlete is a product used for training and exercise. It can be switched on and off via a push button on the front of the
pool.
The Jet Swim Athlete consists of the following parts:
Essential parts
REV DESCRIPTION
4 Se ÄO-00157
15
1302100
16
Technical Data
Engine
20
Volage
Current
Pump capacity
IP class
Ambient temperature
21
The product is intended for the following water values:
Total chlorine content:
27 2
O-ring
26 1 Plugg 2½"
25 2 O-ring
Chloride (salt) content: 24 1 Kabelförskruvning PG7
23 1 Rör Ø2,5X0,25mm L=67mm
22 3 Silikonslang 4x2 mm oarmerad / lpm
pH-value: 21 1 Athlete front
20 2 Skruv MFT
19 8 Skruv MRT
18 2 Insugsgaller
Alkalinity
17 1 Reglageplåt
Pos. Ant. Benämning
Calcium hardness:
Iron:
Copper:
Manganese:
Phosphorus:
Nitrate:
The product warranty does not apply outside these values.
Safety
The jet stream is powerful, which is why one should not be closer than 0.5 m from the stream outlet for a protracted period.
People with long hair should pay careful attention so that their hair does not get stuck in the inlets (the perforated openings in
the front).
Small children should not be in the pool without supervision, especially not when the Jet Swim Athlete device is in operation.
Always inform all the other bathers in the pool before starting the Jet Swim Athlete.
Always make sure that the power to the pump is turned off prior to any work, service or maintenance of the pump begins.
Mounting kit
(for thick pool wall)
DATE APPROVED
2022-02-16 RJ
Surface treatment Designed by: Drawn by: Date Approved by:
E RJ 2019-03-25
The tolerance class in accordance with this Assembly drawing no. Art.no.
part of ISO 2768-1
Scale Revised by: Date
Ingjutningsrör 2½" Athlete
1:2
Drawing number Rev.no.
M13026 0
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
4 5 7
6
Surface treatment Designed by:
E
The tolerance class in accordance with this Assembly drawing no.
part of ISO 2768-1
Ingjutningsrör 2½" Athlete
9
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
14 13
1302130 E
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
230/400V 50Hz 3N~
13.9 / 8.0 A
67 m /h
3
17 18 19
max 3.5 mg/liter*
19970672
EPDM Sh70 Ø67,00x3,00
PVC 13006529 M13023
EPDM Sh70 19970103 Ø10,50x2,50
PA, svart max 250 mg/liter 19982003 19982003
1.4404 1224170 M11108
-
Silikon 1224040
1.4404 7.2–7.6 13006518 M12901
Rostfritt A4 19920230 M5x20 - ISO 14581
Rostfritt A4 19922110 M4x8 - ISO 14583
Polykarbonat (PC) 13006516 M12976
60 – 120 mg/liter (ppm)
1.4404 13006543 M12900
Material Art_nr Ritningsnummer
100 – 3 00 mg/liter (ppm)
max 0.1 mg/liter*
max 0.2 mg/liter*
max 0.05 mg/liter*
max 0.01 mg/liter*
max 50 mg/liter*
Pump kit
27 23
26
25
Drawn by: Date Approved by:
RJ 2019-03-25
Art.no.
Scale Revised by: Date
1:2
Drawing number Rev.no.
M13026 0
Surface treatment Designed by: 1302185 (50Hz), Drawn by: Date Approved by:
RJ 2019-03-25
The tolerance class in accordance with this Assembly drawing no. Art.no.
part of ISO 2768-1
Ingjutningsrör 2½" Athlete Scale Revised by: Date
1:2
Drawing number Rev.no.
M13026 0
1302185HZ (60Hz)
8
2
1
10
4.0 kW
3
265/460V 60Hz 3N~
12.5 / 7.2 A
63 m /h
3
16 IP55 24 Skruv MFT Rostfritt A4
15 1 Fästram Athlete 1.4404
14 1 Packning 452x142x1,5 EPDM Sh60
13 1 Packning självhäftande EPDM Sh60
max +45°C
12 4 Mutter M6M M6 Rostfritt A4
11 4
Bricka RBS Rostfritt A4
10 4 Skruv MFT Rostfritt A4
9 8 Flänsmutter M6MF Rostfritt A4
8 1 Styrplåt 1.4404
7 1 Anslutningsnippel Polykarbonat (PC)
6 1 Bälg EPDM Sh40
5 1 Startknapp 1.4404
4 1 Styrplatta plast Polykarbonat (PC)
3 1 Munstycke Athlete Polykarbonat (PC)
2 2 Packning munstycke EPDM Sh60
1 1 Chassi Athlete 1.4404
Pos. Ant. Benämning Material
Ytbehandling
E
Generell tolerans
ISO 2768-1
Grundsats Jet Swim Athlete
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
12
ENGLISH
Control box
24 23 22
1302090 400V
Surface treatment Designed by: Drawn by: Date Approved by:
E
RJ 2019-02-11 130209NO 230V
The tolerance class in accordance with this Assembly drawing no. Art.no. 1302185
part of ISO 2768-1
Jet swim Athlete pump Scale Revised by: Date
Drawing number Rev.no.
M13021 0
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
11 12
19920225 M5x16 - ISO 14581
13006515 M12902
13006514 M12967
13006513 M12968
19930025 M6 - ISO 4032
19940027 6,4 - DIN 9021
19920340 M6x30 - ISO 14581
19930024 M5 - DIN 6926
13006508 M12977
122466 M20178
122465 M12769
122467 M12768
13006542 M12978
13006541 M12974
13006506 M12975
13006502 M12973
Art_nr Ritningsnummer
Ritad av Datum Godkänd av Datum
RJ 2018-12-12
Artikelnummer 1302100
Skala Storlek
1 : 5 A3
Ritningsnummer Revision
M12983 4
* According to EN16713-3 2016