Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Assembly
Connect the extension tube to the attachment's connector.
Connect the extension tube to the handle-connected suction hose.
Press to secure it in place. Extend the extension tube to the desired position.
Connect the suction hose to the connector and unit until it clicks securely into place.
•
The unit is now assembled and ready for use.
Operation
Connect the power cable's plug to an appropriate mains socket.
Press the On/Off switch
Hold the handle of the hose and gently move the brush back and forth across the floor.
•
If necessary, slide the suction power valve up or down to reduce or increase the suction
power.
Press the On/Off switch
Unplug the unit.
Press the cable rewind button to rewind the power cable.
WARNING
Hold the power cable in your hands whilst it is being
rewound.
•
The storage compartment clip secures the furniture brush and upholstery crevice tool
to the vacuum cleaner.
. Move the power selector until the desired power is obtained.
to turn off the unit.
14
EN
Publicidad
