Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: You may now roll y our tractor offthe
skid.Continue using theinstructions that
follow toremove thetractor from theskid.
WARNING: Before starting, read, u n-
derstand andfollow all instructions inthe
Operation section of this manual. Be sure
tractor is in a welt-ventilated
area. Be sure
the area in front of tractor is clear of other
people and objects.
TO ROLL TRACTOR
OFF SKID
(See
Operation
section
for
location
and
function
of controls)
1. Raise attachment lift lever to its highest
position.
2. Release parking brake by depressing
clutch/brake pedal.
3. Place gearshift lever in neutral position.
4. Roll tractor forward off skid.
5. Remove banding holding the deflector
shield up against tractor.
Continue with the instructions that follow.
CHECK
TIRE PRESSURE
The tires on your tractor were overinflated at
the factory for shipping purposes.
Correct
tire pressure is important for best cutting
performance.
Reduce tire pressure to PSI shown on
tires.
CHECK
DECK
LEVELNESS
For best cutting
results, mower
housing
should be properly leveled. See "TO LEVEL
MOWER" in the Service and Adjustments
section of this manual.
CHECK
FOR PROPER
POSiTiON
OF
ALL
BELTS
See the figures that are shown for replac-
ing motion and mower blade drive belts in
the Service and Adjustments section of this
manual.
Verify that the belts are routed
correctly.
CHECK
BRAKE
SYSTEM
After you learn how to operate your tractor,
check to see that the brake is operating
properly. See "TO CHECK BRAKE" in the
Service and Adjustments
section of this
manual.
_f CHECKLIST
Before you operate
your new tractor, we
wish to ensure that you receive the best
performance
and satisfaction
from this
Quality Product.
Please review the following checklist:
J" All assembly instructions have been com-
pleted.
J" No remaining loose parts in carton.
/ Battery is properly prepared and charged.
J" Seat is adjusted comfortably and tightened
securely.
/ All tires are properly inflated.
(For ship-
ping purposes, the tires were overinftated
at the factory).
/ Ensure mower deck is properly leveled
side-to-side/front-to-rear
for best cutting
results.
(Tires must be properly inflated
for leveling).
v" Check mower and drive belts.
Ensure
they are routed properly around pulleys
and inside all belt keepers.
v" Check wiring.
See that all connections
are still secure and wires are properly
clamped.
While learning how to use your tractor, pay
extra attention to the following
important
items:
v" Engine oil is at proper level.
v" Fuel tank is filled with fresh, clean, regular
unleaded gasoline.
v" Become familiar with all controls, their lo-
cation and function. Operate them before
you start the engine.
v" Ensure brake system is in safe operating
condition.
J Ensure Operator Presence System and
Reverse Operation
System (ROS) are
working properly (See the Operation and
Maintenance sections in this manual).
8
Publicidad
