NORAUTO 2259072 Manual De Usuario página 34

Connect the device to the USB charger or wall
EN
adapter using the charging cable provided. When
the LED indicator is solid red, the device is charging.
When the LED is off, the device is fully charged.
TURNING ON/OFF
To turn the device on, press and hold the button
"M" button until you hear the audible beep. The
blue LED indicator will flash. The device will
automatically connect to the last connected
phone.
To turn the device off, long press the button "M"
button until you hear the audible beep. The blue
LED indicator will turn off.
BLUETOOTH PAIRING
Note: When you use the device for the first time,
you will have to pair it with a Bluetooth-enabled
phone. It can be paired as a hands free kit with
any compatible Bluetooth-enabled mobiles.
1. Turn the device on. It automatically starts to
transmit a Bluetooth signal.
2. Activate your phone's Bluetooth function and
search for new devices.
3. S e l e c t t h e d e v i c e n a m e d " N O R A U T O
BT 31333" from the list to pair and connect.
There will be an audible beep sound indicating
that the Bluetooth pairing mode is successful.
4. If asked, enter the pairing code "0000".
Note: After the initial pairing, anytime you turn on
the device, it will automatically connect to your
phone if you have Bluetooth turned on.
CONNECTING 2 PHONES SIMULTANEOUSLY
Note: This device supports two mobile phones
connected at the same time. If you are willing
to connect the device to the second Bluetooth-
enabled mobile phone, follow the steps below:
1. Turn off the Bluetooth function of the first
connected mobile phone.
2. Turn the device off.
3. Follow the above "BLUETOOTH PARING"
steps.
Note: If the device is disconnected from the
mobile phone, it will turn off automatically after
5 minutes. When the Bluetooth function is
turned on, the device will reconnect to the phone
automatically.
34