Publicidad
ASSEMB
B
LY INSTRUCTIONS
STEP 1:
Remove 2 Screws (No. 55) from Main
Frame (No. 1) with Allen Wrench (No. 74),
then remove 2 Washers (No. 60) and
Shipping Tube (No. 78).
NOTE: Don't discard 2 Screws (No. 55) and
2 Washers (No. 60), because in Step 2, you
need to use them again.
You may discard Shipping Tube (No. 78) or
save it in case you would like to repackage
the item in the future.
STEP 2:
Attach Front Stabilizer (No. 2) to Main
Frame (No. 1) using 2 Screws (No. 55) and
2 Washers (No. 60). Tighten and secure
with Allen Wrench (No. 74).
-36-
Publicidad
