Samsung DW80F600UTS Manual Del Usuario página 26

iNFORMATiON CODES
The Control Panel displays information codes to help you understand what is occurring with your
dishwasher. If you see any of the codes listed below, you should select the Cancel and Drain option, and
then follow the instructions in the Solution column.
If your dishwasher have any problem, below CODE SYMBOL light(s) is(are) blinked.
÷ ;,-
SmartAuto Nom_a I Neavy _ D_lcate
@
5madAuto Norma _ Heaw Delcate
SmartAuto Norma I Heavy Delcate
Stoat[Auto ..... I .... I .......
SmamAuto Norma Neavy I De]care
SmartAuto Norma I Heavy I Delcate
9 @ @
Sma_Auto Norma _ lleaw Delcate
°.
SmartAuto Norma I ffeaw Delcate
@ @
SmartAuto Norma] Heavy Deicate
Temperature Sensor error
Heater error
High temperature heating
erFor
Lowqevel water error
Water supply error
Functional error. With the dishwasher empty, add
detergent, and then run a cycle.
If the problem continues, go to your house circuit breaker
panel, set the dishwasher's circuit breaker switch to off,
and then contact an authorized Samsung service center.
Oheck whether the water supply valve is closed, the water
supply is suspended or the water inlet valve or line is
frozen or clogged by foreign particles.
If the problem continues, dose the water supply valve, and
then contact an authorized Samsung service center.
High temperature water Oheck the temperature of the supplied water. If it is higher
than 176 °F (80 °0), a functional error may occur with the
supply error dishwasher.
Oheck whether the drain hose is dogged or folded. If the
Drain error problem continues, dose the water supply valve, and then
contact an authorized Samsung service center.
Over-level water error
SmartAuto Norma [ heavy De,care
Leakage error
Button error
Oommunication Error
SmartAuto I Norma I Heavy ! DeJca_
Functional error. Close the water supply valve and go to
/our house circuit breaker panel, set the dishwasher's
circuit breaker switch to off, and then contact an
authorized Samsung service center.
Functional error. Turn off the dishwasher and try to start it
again.
If the problem continues, contact an authorized Samsung
service center.
For any codes not listed above, call 1-800-SAMSUNG (726-7864)
26 troub@shooting
DW80F600 DDSl-01555A-01 EN.indd Sec7:2d 2013-06-04
EC 11:27:01
I