Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Instructions
UNPACKING
THE WASHER
.ikWARNING:
Re,<e
the
and plastic bags after the washer is unpacked.
Make
materials
inaccessible
to children.
Children
might use
them tot play. Cartons
covered
Mth rugs, bedspreads,
or plastic sheets can become
airtight
chambers
causing
suffocation.
1. Grit
and
relllove
the top and bottom
packaging
straps.
2. X._]file it is in the carton,
caretiflly lay the washer on its
side. DO NOT lay the washer on its ti'ont or back.
3. Turn down the bom)m flaps--remove
all base
packaging,
including
the cardboard,
sUrof0am
base
and stvrotoam
tub support
(inserted
in center
(ff base).
NOTE:
If you axe h_stallh_g a pedestal,
proceed
to the
installation
h_structions
that come with the pedestal.
4. Carefully
return
the washer to an upright
position
and
i'ei//ove
the
C_lI'[On,
5. Careflfllx move the washer to xfithin 4 teet(
122 cm) of
the final location.
6. Remove
the fi)llowing fl'om the back side of the washer:
4 bolts
4 plastic space_
(including
rubber
grommets)
4 power
cord retaine_
.//"
f
,
NOTE:
Failure
to remove
the shi ) )in(* braces
'
I I
&
C_III
Cause
the washer to become
sexerelv unbalanced.
Save
all bolts
for
future
use.
NOTE:
If you must transport
the washer at a later date,
you must reinstall
the shipping
support
hardware
to
prevent
shipping
damage.
Keep the hardware
in the
plastic bag provided.
14
Publicidad
