WolfPack ZY8314A Manual De Instrucciones página 11

WARNING Read all safety instructions and guidelines Failure to maintain
the safety instructions and guidelines can lead to electric shock, fire and/
or serious injury.
Keep the safety instructions and guide-lines for the future.
1. CONTENT
1 Piece Drill
1 Piece Handle and depth regulator
1 Piece Instruction manual
2. TECHNICAL DATA
Voltage
Protection
Power
Speed
r.p.m. speed
Reversal rotation
Chuck
Drilling capacity
steel/wood/brick
N. Impacts
Vibrations: acceleration
measured in m/s
Sound power level
LpA dB (A) K=3dB (A)
Sound pressure level
LwA dB (A) K=3dB (A)
Weight
Noise and vibration information
The values in the table are measured according to the following standard EN 60745. Tolerance
K=3 dB
Caution: Wear hearing protection!
The specific vibration level is reflected in the table.
The vibration level indicated in these instructions has been determined in accordance with the
measurement procedure laid down in EN 60745 and can serve as a basis for comparison with
other devices. The vibration level may vary according to the respective application of the power
tool and may in some cases be above the value indicated in these instructions.
Observation: In order to accurately determine the vibration load during a given working time,
it is also necessary to consider the times when the device is switched off or is in operation but
not in use. This can lead to a drastic reduction of the vibration load during the total working time.
Regulatory use:
The device is designed for percussive drilling in brick, concrete and stone, as well as for non-
percussive drilling in wood, metal, ceramics and plastics. Devices equipped with electronic
regulator and reverse rotation are also suitable for screwing and threading.
Any use which does not comply with these instructions can cause damage to the machine and
seriously endanger the life of the user. In order to protect warranty claims and product safety,
it is recommended that the safety warnings be strictly observed. For reasons related to the
manufacturing characteristics of the product, all other risks cannot be completely excluded.
2 . (K=1,5)
11
230V - 50Hz
Class II
650W
1
0 - 3.000
SI
1,5 - 13 mm.
13 - 25 - 16
0 - 44800
8,72
93 dB(A)
101 dB(A)
1,8 kg
EN
EN