Publicidad
Idiomas disponibles
Idiomas disponibles
Attention: For the proper functioning of the machine and for your own safety, use only
the tools and accessories indicated in the instructions or the appropriate indicative
elements of the catalogue. The use of unsuitable accessories or consumables may
endanger the person using the machine.
Caution, failure to comply with these instructions may
cause malfunctions and/or incidents.
- For operational safety, do not remove the protection or screws from their original
position, and in particular never operate without the tool's protective cap.
- Do not touch the moving parts of the machine or its accessories without disconnecting
the machine cable from the mains.
- Pay maximum attention to the sound pressure, take appropriate measures to protect
your hearing in the event of a sound pressure greater than 85 db (A).
- Do not use the machine in conditions of tiredness or illness.
4. DESCRIPTION OF THE MACHINE
1. Drill chuck
2. Depth regulator
3. Handle
4. Switch (percussion activation)
5. Rotation direction inverter
6. Number of turns regulator
7. Lock button
8. Switch
5. INSTRUCTIONS FOR USE
Assembly of the bits:
Caution: The bits and drill bits must be properly aligned in the chuck so
that the chuck exerts uniform pressure over the entire surface of the drill bit.
The drill has a keyless chuck. Holding the chuck base with one hand, turn
the top with the other hand to tighten or loosen.
Usage switching:
To drill or screw on, position button 4 on the (BROCK) symbol.
For hammer drilling, turn knob 4 on the (HAMMER) symbol.
Caution: Switch only when the drill is stopped.
Do not use percussion with fragile materials.
Reversal of direction of rotation:
To change the direction of rotation (5), when the machine is stopped, press the
change button from right to left. When the direction change button is placed on the
right, the direction of rotation will be clockwise, if viewed from the working position.
When the direction change button is placed on the left, the direction of rotation will be
counterclockwise.
1
2
3
13
4
5
6
8
7
Publicidad
