Off Indel B SLIM Serie Manual Del Usuario página 50

EMPTYING THE SMART TRAY
Always keep the inside of the product clean and dry.
Remove the condensation from the Smart tray below the freezer compartment, as shown in the figure.
DEFROSTING
Ice can accumulate in the freezer compartment and on the surface of the refrigerator compartment.
Always defrost the refrigerator when the frost layer is 3-4 mm or greater.
Otherwise, the product's performance may drop.
To defrost the product, proceed as follows:
- Remove all food;
- Turn off the product;
- Defrost when the products may remain as cool as possible outside of the appliance. Do not use sharp or pointy objects to
remove the ice and frost from the walls, since the product could be damaged, causing refrigerant leaks.
- Remove, empty, and dry the drip tray under the evaporator.
-
As needed, during defrosting, place a towel under the refrigerator to make it easier to collect the water.
- Only turn the product back on after it has been carefully defrosted, cleaned, and dried.
ATTENTION
Do not accelerate the defrosting process by forcing the removal of the ice layer with sharp objects or using a hair dryer
or other electrical device.
EXTRAORDINARY MAINTENANCE
ATTENTION
All extraordinary maintenance interventions must be carried out by technical personnel authorized by the
Manufacturer.
48 SLIM OFF_(DC)_IM_20221115