Descargar Imprimir esta página

Craftsman 580.752860 Manual De Instrucciones página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

PRODUCT SPECIFICATIONS
PressureWasher Specifications
Max Outlet Pressure ...........
1700 PSi (117.2 BARS)*
Max Flow Rate ...................
1.3 GPM (4.9 LPM)*
Detergent Mix .................
See MFR's instructions
Water Supply Temperature....
Not to exceed IO0°F (38°0)
Motor ........................
Universal (brush) Type
Rated Voltage ..........................
120 Volts AC
Current .................................
12.5 Amps
* This pressure washer is rated in accordanceto the
Pressure Washer Manufacturers Association (PWMA)
standard PWI01 (Testing and Rating Performance of
Pressure Washers).
OWNER'SRESPONSIBILITIES
GeneralRecommendations
Regular maintenancewill improve the performance and
extend the life of the pressure washer. See any Sears or
other qualified service dealer for service.
The pressure washer warranty does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, the operator must maintain
pressure washer as instructed in this manual including
proper storage as detailed in Storage.
Before Each Use
1. Cleandebris.
2. Check water inlet screen for debris or damage.
3. Check high pressure hose for leaks.
4. Check steam hose for leaks.
5. Check detergent and water tank siphoning tubes for
damage.
6. Check spray gun operation.
7. Check steam gun operation.
8. Cleansteam gun tip.
PRESSURE WASHERMAINTENANCE
Clean Debris
Daily or before use, clean accumulated debris from electric
pressure washer, inspect cooling air slots and openings on
the front, rear and bottom of the electric pressure washer.
These openings must be kept clean and unobstructed.
The electric pressure washer parts should be kept clean to
reduce the risk of overheating and ignition of accumulated
debris.
*
Use a damp cloth to wipe exterior surfaces clean.
NOTICE Improper treatment of the electric pressure washer
can damage it and/or shorten its life.
*
DO NOT insert any objects through cooling slots.
15

Publicidad

loading