ENGLISH
INSTALL THE PALLET
(The picture does not exactly match the actual product, and is only for installation instructions reference)
Lay a protective cushion and turn the main body of the bed upside down; take out the hexagon socket screw M6*16, nut M6, flat washer
φ
φ
6, spring washer
6 from the screw package.
PALLET
INSTALL THE SWITCH
(The picture does not exactly match the actual product, and is only
for installation instructions reference)
Install the hexagon socket screw M8*120 of the circular machine,
and install the nut M8 clockwise.
CASTOR USE METHOD
Lock the caster
After pushing the overbed table to the desired position, depress the
brake with your foot and lock the caster when you hear a "click" , as
shown in the figure below.
INSTALL THE COUNTERTOP
Take out the round machine hexagon socket screw M6*12, flat wa-
φ
sher
6, and spring washer
it clockwise.
Unlock the caster
Lift the brake with your foot and unlock the castor when you hear
a "click" .
BRAKE
φ
6 from the screw package and install
6