Kenmore HE2 Serie Manual Del Proprietário página 17

2nd Rinse
A second rinse can be used to aid in the removal of detergent or
bleach residue from garments. This option provides an additional
rinse with the same water temperature as the Normal rinse.
Cycle Signal
This signal is helpful when you are removing items from the
washer as soon as it stops. Select ON or OFF.
Preset cycle settings of Water Temperature, Spin Speed, and
Rinse Options can be changed. You can change a modifier after
starting a cycle anytime before the selected Modifier begins. Not
all Modifiers are available with all options and cycles.
Auto T_rnpControl
0 Hot/Cold
I igh It Warm/Warm
Medium I._ Warm/Cold
/
Low O Cold/Cold
© ©
Spin Wash/Rinse
Speed Temp
To change the spin speed, select the SPIN SPEED button
until the desired setting illuminates.
• To change the water temperature, select the WASH/RINSE
TEMP button until the desired setting illuminates.
Wash/Rinse Temp
Select a water temperature based on the type of load you are
washing. Use the warmest wash water safe for fabrics. Follow
garment label instructions.
Warm rinses leave the loads dryer than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.
Temperature Guide
Wash Water Temperature Suggested Fabrics
HOT Whites and pastels
Heavy soils
WARM Bright colors
Moderate to light soils
COLD Colors that bleed or fade
Light soils
In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils may be difficult to remove.
Auto Temp Control
ATC (Auto Temp Control) electronically senses and maintains a
uniform water temperature. ATC regulates incoming hot and cold
water. The ATC is automatically turned ON when a cycle is
selected. See Preset Cycle Settings table in "Cycles."
• ATC ensures consistent cleaning.
• ATC works for the wash temperature with Warm/Warm,
Warm/Cold, and Cold/Cold settings.
• ATC works for the rinse temperature with the Warm/Warm
setting.
• The Cold rinse temperatures depend on the cold water at
your faucet.
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these
washer cycles.
CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS
Delay Start 2nd Rinse Cycle Signal
Whitest Whites Soiled white fabrics _' v' _'
Heavy Duty Heavily soiled underwear, towels, shirts, etc., made of cotton _' v' i/
Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of _' v' v'
polyester, nylon, cotton, linen, or cotton blends
Express Wash Small loads of 2-3 lightly soiled cotton, polyester, nylon, and _' v' v'
cotton blends.
Delicate Curtains and delicate clothing, dresses, skirts, shirts and _' v' i/
blouses
Rinse & Spin All loads _' v' i/
Drain & Spin All loads _' v'
17