Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION OF THE BLADES
WARNING: To reduce the risk of personal injury, do not bend the
blades while installing, balancing the blades, or cleaning the fan.
1
Fasten the blade to the motor, through the blade support
plates, with the provided screws and lockwashers. Make
sure screws are TIGHT! Loose motor screws can contribute
to unnecessary noise during operation.
2
Repeat this process to attach the other blades.
Cordless power screwdrivers are NOT recommended,
as they usually strip the heads of the screws and
usually will not fully compress the lock washers on
the motor screws.
10
| hinkley.com
NOTE:
Fig. 1
Blades
Blade support plates
Screws
Publicidad
