Descargar Imprimir esta página

Husqvarna FS 410 D Manual Del Operador página 31

Ocultar thumbs Ver también para FS 410 D:

Publicidad

Idiomas disponibles

Idiomas disponibles

MODEL
-----
FS 0 D
This equipment has been tested for EMC using the methods outlined in EN98:98. The tests found that
the equipment did not exceed the radiated emission limits. The saw was tested in a semi-anechoic chamber at
NCEE, Lincoln, Nebraska, a FCC registered laboratory. The test report is on file at Husqvarna Construction Products,
Olathe, Kansas.
This equipment has been tested for HAV in accordance with ISO 9. The results are shown in the following chart.
Model
FS 0 D
The Aeq value is the measured continuous vibration at the extended handlebars expressed as acceleration with the

units of m/s
(meters per second squared). The measured values were taken with a fully warmed engine, running
at maximum rated RPM and a 00-mm blade. The measurement point was the grip of the extended handlebars.
Instrumentation was a Larson Davis model HVM00 Human Vibration Meter and the SEN0 Triaxial Accelerometer.
The accelerometer was secured to a hand adapter, which allows it to sense the same magnitude of vibration as the
operator's hand.
The Maximum Exposure Time is a calculated value referenced to an 8-hour workday and the "daily exposure action
as defined in Directive 2002/44/EC of 25 June 2002.
value" of . m/s

The time weighted daily vibration exposure time can be found with the following formula:
Over exposure to vibrations can result in blood vessel or nerve injury to persons suffering with blood circulation problems.
Seek medical attention if you experience physical symptoms that can be related to over exposure to vibrations. Examples
of symptoms are numbness, lack of feeling, tingling, tickling, pain or a reduction of normal strength, or changes in skin
color. These symptoms normally appear in the fingers, hand or wrists.
TECHNICAL DATA
Technical Data - Sound Level, EMC, and HAV
(ElectroMagnetic Compatibility)
Maximum Vibration (Aeq) in m/s
Maximum Exposure Time = (./Aeq)
Sound Level
POWER LEVEL
Lwa (dB)
EN 
0
-
EMC
HAV
(Hand-Arm Vibration)
.
PRESSURE LEVEL
Lpa (dB)
EN ISO 0
Maximum Exposure Time
2
+%

X 8 hours
9.
-


Publicidad

loading