TERMA VEO SMART WI-FI Manual página 8

INTENDED USE OF DEVICE
The heating element is an electric device intended
solely for installation in radiators (standalone or con-
nected to the central heating system).
Heating element power output should be matched
with radiator output for parameters of 75/65/20° C.
INSTALLATION
OR REMOVAL
Detailed information demonstrating the different
ways of installing or removing a radiator heating el-
ement is available from the manufacturer or import-
er (see footnotes at the end of the manual). Below
we list some basic requirements and principles which
must be followed to ensure long term, reliable oper-
ation of the product.
TECHNICAL INFORMATION
Model markings
(power connection type)
Power supply
Appliance class
Towel rail connection thread
IP code***
WiFi
Heat outputs available (**)
power [W] 120 200
Class I
length [mm] 325 285
power [W] 100 200
Class II
length [mm] 165 220
* device intended to be connected permanently to the system
** details on the rating label of the device
*** degree of protection provided by enclosure
8
PB (Straight cable without plug)*
PW (Straight cable with plug)
SW (Spiral cable with plug)
MS (screw connection + on/off switch)*
230 V / 50 Hz
Class I / Class II (**)
G 1/2"
IPx5
2,4 GHz 802.11 b/g/n
300 400 — 600 800 1000 1200
310 345 — 375 485 575 670
300 400 500 600 800 1000 1200
260 350 350 465 600 670 670
1500 1800 2000
860 1025 1130
1500 1800 2000
670 670 670