GE PHP9030 Manual De Instrucciones página 3

[ WARNING j COOKTOPSAFETY INSTRUCTIONS
[] In the event of a fire, do not use water or grease on [] To avoid spillover and fire, use a minimum amount
fires. Never pick up a flaming pan. Turn the controls
off. Smother a flaming pan on a surface unit by
covering the pan completely with a well-fitted lid,
cookie sheet or flat tray. Use a multi-purpose dry
chemical or a foam-type fire extinguisher.
[] Never leave the surface units unattended at medium
or high heat settings. Boilovers cause smoking and
greasy spillovers that may catch on fire.
[] Never leave oil unattended while frying. If allowed
to heat beyond its smoking point, oil may ignite
resulting in fire that may spread to surrounding
cabinets. Use a deep fat thermometer whenever
possible to monitor oil temperature.
of oil when shallow pan-frying and avoid cooking
frozen foods with excessive amounts of ice.
[] Use the proper pan size - select cookware
having flat bottoms large enough to cover the
surface heating element. The use of undersized
cookware will expose a portion of the surface
unit to direct contact and may result in ignition
of clothing. Proper relationship of cookware to
surface unit will also improve efficiency.
[] To minimize the possibility of burns, ignition of
flammable materials and spillage, the handle of a
container should be turned toward the center of the
range without extending over nearby surface units.
(,D
3>
"rl
I"n
--4
..<
Z
"tl
O
Z
!
O
IAWARNING I INDUCTION COOKTOP SAFETY INSTRUCTIONS
[] Use care when touching the cooktop. The glass
surface of the cooktop will retain heat after the
controls have been turned off.
[] Do not cook on a broken cooktop. If the glass
cooktop should break, cleaning solutions and
spillovers may penetrate the broken cooktop and
create a risk of electric shock. Contact a qualified
technician immediately.
[] Avoid scratching the glass cooktop. The cooktop
can be scratched with items such as knives,
sharp instruments, rings or other jewelry, and
rivets on clothing.
[] Do not place or store items that can melt or catch
fire on the glass cooktop, even when it is not being
used. If the cooktop is inadvertently turned on, they
may ignite. Heat from the cooktop or oven vent
after it is turned off may cause them to ignite also.
[] Use CERAMA BRYTE ® ceramic Cooktop Cleaner
and CERAMA BRYTE ® Cleaning Pad to clean
the cooktop. Wait until the cooktop cools and the
indicator light goes out before cleaning. A wet
sponge or cloth on a hot surface can cause steam
burns. Some cleaners can produce noxious fumes
if applied to a hot surface. Read and follow all
instructions and warnings on the cleaning cream
label. NOTE: Sugary spills are an exception. They
should be scraped off while still hot using an oven
mitt and a scraper. See the Cleaning the glass
cooktop section for detailed instructions.
A CAUTION:
Persons with a pacemaker
or similar medical device should exercise caution
when using or standing near an induction cooktop
while it is in operation. The electromagnetic field
may affect the working of the pacemaker or
similar medical device. It is advisable to consult
your doctor or the pacemaker manufacturer about
your particular situation.
[ WARNING i RADIO FREQUENCY INTERFERENCE
This unit has been tested and found to comply
with the limits for a class B digital device, pursuant
to Part 18 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This unit generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
unit does cause harmful interference to radio or
television reception, which can be determined by
turning the unit off and on, the user is encouraged
to try to correct the interference by one or more of
the following measures:
[] Reorient or relocate the receiving antennae.
[] Increase the distance between the unit and
receiver.
[] Connect the unit into an outlet or a circuit different
from that to which the receiver is connected.
READ AND SAVE THESE INSTRUCTIONS
49 80742