Publicidad
Idiomas disponibles
Idiomas disponibles
O _
_±
0
REMOVING AND INSTALLING
DRAWERS
- Empty the drawer.
Fully extend the drawer.
Release Left
Figure 6
Release Right
Q
REINSTALL
DRAWERS
Ball bearing slide - Pull slides and slide carrier out to fully
extended position (see illustration.) Hold the slide on the
cabinet while aligning it with the slide on drawer. Slightly
insert one side and repeat for the other side. Slowly push
drawer to its fully closed position to engage slide. Open
drawer and reclose to ensure proper operation.
slide carrier
4
slide
BALL
BEARING
SLIDES
Lever Style - Lift or lower (depending on the slide) the
release lever on both sides, (this allows the slides to ride
over the stops.) Putt out to remove.
\
Tab Style - Depress the release tabs on both sides,
(this allows the slides to ride over the stops).
Putt out to remove.
Publicidad
