Publicidad
Idiomas disponibles
Idiomas disponibles
The power supply cable must not touch any hot parts and must be positioned so that its temperature
will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without alterations.
Any alterations must only be made by a qualified electrician.
•
If the cable is damaged or to be replaced, the operation must be carried out the by after-sale
agent with dedicated tools to avoid any accidents.
•
If the appliance is being connected directly to the mains an omnipolar circuit-breaker must be
installed with a minimum opening of 3mm between contacts.
•
The installer must ensure that the correct electrical connection has been made and that it is
compliant with safety regulations.
•
The cable must not be bent or compressed.
•
The cable must be checked regularly and replaced by authorized technicians only.
The bottom surface and the power cord of the hob are not accessible after installation.
Correct disposal of this
product
The symbol on the product, or in its packaging, indicates that this
product may not be treated as household wasted, Instead, it should
be taken to the appropriate waste collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could
otherwise be caused by the inappropriate waste handling of this
product. For more detailed information about the recycling of this
product, please contact your local council, your household waste
disposal service, or the shop where you purchased the product.
82
Publicidad
