Mitsubishi Electric SLZ-KF09NA Manual De Instrucciones página 13

Seasonal airflow
Seasonal airflow
Cooling/Heating
Select:
F1 F2 F3 F4
Timer functions are different by each remote controller.
For details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller.
B
A
C
D
1 Select the setting with the [F4]
button.
After changing the setting, press
the [SELECT] button to save the
setting.
OFF: The function is disabled.
Cooling only: When the thermostat
turns off during cooling mode, the
vanes move up and down.
Heating only: When the thermostat
turns off during heating mode,
the vanes move to the horizontal
Cooling/Heating: The function is
enabled during both cooling mode
and heating mode.
* In order to enable this function,
to "Auto".
on and off times and the set temperature.
1. Switching to the editing mode
1 Press the
button when the unit is operating or stopped.
blinks. (Fig. 1)
2. Selecting the setting pattern
1 Press the
button to select the setting pattern number.
button is pressed, the pattern number A
Each time the
3. Selecting the day of the week
1 Press the
button to select the day of the week to set.
button is pressed, the day of the week B
Each time the
4. Selecting the operation settings
1 Push the
button to select the operation on or off setting. (Fig. 2)
( ) is lit.
Each time the button is pressed, the setting changes in the following order:
2 Press the
button to select the operation time. (Fig. 3)
The operation time blinks.
Set the operation time using the
3 Push the
button to select the set temperature. (Fig. 4)
The set temperature blinks.
Set the temperature using the
When the AUTO (dual set point) mode is enabled, press the
C and the lower limit D. (Fig. 5)
4 By pressing the
button, the pattern number settings for the displayed day of the week are deleted.
5 Repeat steps 2–4 to select the settings for each day of the week.
Point the transmission area of the wireless remote controller towards the receiver on the indoor unit and operate
Press the button.
Press the button.
The weekly schedule operates when
The weekly schedule operates when all of the On/Off timer settings have been executed.
buttons.
buttons.
button to switch between the upper limit
is on.
.