Costway HZ10079NA Manual Del Usuario página 9

6
Ø3.5*14mm
Ø4*30mm
11 X1 set
We have included a set of tipping restraint hardware for this
unit. You must install this hardware to prevent accidents or
injuries that can result from the unit falling.
When properly installed, this restraint can provide protection
against the unexpected tipping of the unit due to small
tremors, bumps or climbing. We strongly recommend
mounting this hardware to a wall stud and your unit.
NOTE: The tipping restraint hardware included is for
wooden stud wall construction. It must be attached to a
wall stud. Depending upon your wall construction,
different anchor hardware may be required. Please
contact your local hardware store for assistance. Young
children can be seriously injured by tipping furniture. You
must install the tipping restraint hardware with the unit to
prevent the unit from tipping, causing any accidents or
damage. The tipping restraints are intended only as a
deterrent and are not a substitute for proper adult
supervision. The tipping restraints are not earthquake
restraints. If you wish to add the extra security of
earthquake restraints, they must be purchased and
installed separately.
16
Install the tipping restraint hardware
EN
1
3
WALL
Use short screws to fix
the device on the back
of the board (A) .
WALL
2
Make marks
on the wall .
WALL
4
Put two anchors
in the holes.
5
WALL
Drill two φ6 holes
in the wall.
Fix the device on
the wall with long
screws.
6
WALL
17