Publicidad
Idiomas disponibles
Idiomas disponibles
Connect
Connect to mobile device
1
Enable bluetooth on your mobile
device.
2
The app will look for the camera.
• For one camera, it will connect
automatically.
• For more than one camera, the app
will prompt you to select one camera
at a time. Each camera has a unique
MAC ID printed on the back. Use
that ID to select the camera you
want to connect.
3
A QR code will display in the app. To
connect your camera to the app, hold the QR code approximately 3-8
inches (7-20 cm) from the camera lens.
4
The camera LED turns purple and the camera beeps.
Connect to Wi-Fi
NOTE: Be sure you are on the same Wi-Fi
network you wish to connect your camera
to.
1
Choose your Wi-Fi network from the
list. Tap NEXT.
2
Enter your Wi-Fi password, if
necessary. Tap DONE.
NOTE: The camera will beep during some
steps in this process.
3
Publicidad
