Publicidad
Idiomas disponibles
Idiomas disponibles
Before You Call For Service
Problem
Possible Cause
What to do
No Power.
A fuse in your home may
Replace fuse or reset circuitbreaker_
be blown or the circuit
breaker tripped.
Cabinet Temperature
too High
Power surge,
Unplug the wine cooler,wait a few
seconds and then plug it back Ino
Plugnot fully Inserted into
Make sure the 3-prong plug on the
wall outlet
wine cooler isfully inserted In outlet.
Temperature setting
Verifythe temperaturecontrolsetting°
adjust if neccessary.
Door not shut propedy
or opened excessively
Ensure that the door is M_y closed
and that the gasket ls sealing against
the cabinet. Open the door only as
needed and for short perlods of tlme.
Condensation on the
cabinet and!or door
Recently added a large
quantity of warm bottles
to the cabinet
High humidity conditions
tn the home,
Door not shut properly
or opened excessively
Umlt the quantity of warm bottles
being introducedto the cabinet at the
same ttme° Attempt to phase in the
load introduction if possible.
The condensation wfll subside once
humidity conditionsreturn to normal.
Ensure that the door ls fully c_osed
and that the gasket Is sealing against
the cablneL Open the door only as
needed and for short periods of time.
Error Codes
LE
HE
EE
Internal Cabinet
temperature too low.
tntemal Cabinet
temperature too high.
Temperaturesensor
faUlL
The current cabinet temperature Is
lower the 15o8_F(-9_C).
The current cabinet temperature
ls higher then 104°F (40°C)o
The temperature sensor ts
disconnected or has malfunctioned.
IMPORTANT!
tf you experience any error code, take steps to preserve your wine then caU
the toll free number listed below for assitance.
If none of the aboverectify the situatfon please contact our customer service depart-
ment at 1-800-2.6- Dal_b_j
(1-800-263-2629)
10
Publicidad
