Publicidad
Idiomas disponibles
Idiomas disponibles
1o Lay the unit on it'sback°
2. Remove the kickplate by remov-
ing the three retainingscrews,
(locations shown in Fig El)
3, Remove the three screws locat-
ed on the lower door hinge (Fig
E2)o
4. Pull the door downward until it
releases from the upper hinge
pin,
5,
Remove the plastic screw cap
from the top }efthand (Fig E3)
side and install It on the top
fight hand side of the door
frame.
6. Unscrewthe upper door hinge
pin (Fig E4) from the right side
of the worktop and install ft on
the left side of the worktop.
7. Positionthe main door backon
the cabinet and push up until
the top hinge pin ls Inserted
into the top of the door,
8, Remove the lower support pin
from the door and reposttlonit
on the lower hinge as shown in
Fig, E5.
9, Re-install the lower supportptn
on the right side of the door,
10. Make sure to align the
door and cabinet
before fastening
the lower hingescrews
to the cabinet.
11. Re-install the kick-
plate.
Rg,E5
eupportpin
Bottomscrew positionchanged
from rightto ieft for new open-
Ing.
Rg, E4
8
Publicidad
