WARNING
POWER
REQUIREMENTS
Power
requirements
for electrical equipments
differ from
area to area.
Please make sure that your equipment meets the power re-
quirements in your area.
If in doubt, ask a qualified electrician.
120 V, 60 Hz in USA and Canada
220 V, 50 Hz in Europe except UK
240 V, 50 Hz in UK and Australia
110—120V/220—240V,
50/60Hz
internally switchable for
other countries.
VOLTAGE CONVERSION
Do Not Attempt This Conversion Yourself.
Models for Canada, USA, Europe, UK and Australia are not
equipped with this facility.
Each unit is preset at the factory depending on its destina-
tion, but some units can be converted to 110—120 V or to
220—240 V as required. If your unit has this feature, take
the equipment
and the following voltage conversion
to a
qualified Service Repair Shop or a professional serviceman.
1. Disconnect the power cord.
2. Remove the bottom cover.
3. Remove the existing Line Voltage Fuse and insert the re-
quired Line Voltage Fuse in the proper fuse holder ac-
cording to the printed instructions.
t ——
FRONT
roi [|_|
Fil]
[J
110V—120V F1:500mA
220V—240V F2:500mA
PRECAUTIONS
=
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION:
TO
REDUCE
THE
RISK
OF ELECTRIC
SHOCK,
DO NOT REMOVE
COVER
(OR
BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.
a
The lightning flash with arrowhead
symbol
superimposed
i)
@
across a graphical representation of a person, within an equi-
Nig
lateral triangle, is intended to alert the user of the presence of
lig
e
uninsulated "dangerous voltage" within the product's enclo-
sure; that may be of sufficient magnitude to constitute a risk
of electric shock to persons.
®
The exclamation point within an equilateral triangle is intend-
ed to alert the user of the presence of important operating
@
and maintenance (servicing) instructions in the literature ac-
companying the appliance.
1. Use only household AC power sources.
Never use DC power sources.
2. Touching the plug with wet hands risks dangerous elec-
tric shocks.
Always pull out by the plug and never the cord.
3. Make
sure
the
power
consumption
of each
audio
component does not exceed wattage specified on the
rear panel.
Only connect other audio components.
4. Only let a qualified professional repair or reassemble
the equipment.
An unauthorized
person
might
touch
the internal parts and receive a serious electric shock.
5. Never allow a child to put anything, especially metal
into this equipment.
A serious
shock
or maliunction
may occur.
6. If water is spilled on this equipment, disconnect and
call your dealer.
7. Make sure the equipment is well ventilated and away
from direct sunlight.
8. Keep away from heat (stoves, etc.) to avoid damage to
the external surface and internal circuits.
9. Avoid
spray-type
insecticides which
will damage
the
equipment and may ignite suddenly.
10. To avoid damaging the finish never use alcohol, paint
thinner or other similar chemicals.
11. Always place the equipment on a flat and solid surface.
12. To avoid damages, place the turntable in its original box
wrapped in its protective wrappers when transporting.
13. Please
read
this manual
in its entirety and Keep
it
handy for further reference.
This equipment confirms to No. 76/889/EEC standard.