Akai AP-D210 Manual Del Usuario página 8

PLAYBACK OPERATION
—
Before Operation
*
BS
Remove the Stylus Guard and unlock the Tone Arm.
Set the Cueing (CUE) leverto ¥.
1. Place a record on the Platter.
2.
3. Move the Tone Arm to the desired position above the
Set the SPEED selector to 33 or 45.
record.
The Platter will being to rotate and the SERVO LOCK indicator
will light to indicate that the speed has been locked in.
. Set the Cueing (CUE) lever to ¥ to lower the Tone Arm.
Playback will begin.
. At the completion of playback, the Tone Arm will rise and
return to the Tone Arm Rest automatically. The power will
be cut off and the Platter will stop rotating.
DDseo fp _| PERLE
&) @ @®
Cueing (CUE) Lever
To skip a certain part of the record, set the Cueing lever to
¥ . The Tone Arm will rise. Move the Tone Arm to the
desired section and set the Cueing lever to ¥ . The Tone
Arm will descend and playback will begin.
CUT/RETURN Switch
To stop playback before the end of the record, depress the
CUT/RETURN switch. The Tone Arm will return to the Tone
Arm Rest automatically and the Platter rotation will stop. Set
the Cueing lever to V .