Publicidad
Idiomas disponibles
Idiomas disponibles
Adjustment methods of each part
VI.Battery installation
The battery is mainly composed of two pieces, cell and protection board PCM (power battery is generally called
battery management system BMS). Cell is equivalent to the heart of the battery, and the management system is
equivalent to the brain of the battery.
Cell is mainly composed of positive electrode material，negative electrode material, electrolyte, diaphragm and
Shell, while the protection board is mainly composed of protection chip(or management chip), MOS tube,
resistor, capacitor, PCB board, etc.
Insert the battery into the seat tube and connect the battery cable, make sure the seat tube lock is tightened
tightly and then turn on the battery switch to ride.
1.Insert the battery into the seat tube, then
2.Turn on the battery switch before use
connect the battery cable
3.Take out the battery and charge the
4. You can also choosevehicle
battery separately
charging
Red light indicates normal charging Green
light indicates charging completed
06
Publicidad
