cecotec BAMBA PRECISIONCARE SAMURAI Manual De Instrucciones página 77

Profiling
For close trimming of hair or beard, use the appliance without a
guide comb.
Remove the guide comb for:
- Sideburns trimming (Fig. 6).
- Neck trimming (Fig. 7).
- Beard trimming (Fig. 8).
- Marking the hairlines (Fig. 9).
1. Comb the hair with a fine-tooth comb before shaping.
2. Switch on the appliance by pressing the on/off button.
3. Pass the appliance over the area to be contoured. Do not move
the appliance too fast. Make smooth and gentle movements.
Do not press the blade excessively against the skin as this may
cause injury.
4. When you have finished, switch off the appliance by pressing
the on/off button again and clean it.
4. CLEANING AND MAINTENANCE
After each use
Turn off the appliance.
-
Remove the guide comb from the blade and clean the hairs
-
(Fig. 10). To do this, shake out the guide comb or use the
ENGLISH
BAMBA PRECISIONCARE SAMURAI
77