Uniteck UNIFIX 1.C 30 Manual Del Usuario página 11

UNIFIX – PANEL FIXING
•
Place your panel in the desired position (without glueing)
•
Place a mark around the brackets to visualise the mounting zone
•
Remove the angles from your panel then Put the glue on your 4 brackets as indicated in white on
the picture
Recommendations : Apply glue in lines 1,5 to 2,5 mm in order to improve polymerization time
and efficiency.
•
P l a c e the brackets on the previously marked surfaces. Press briefly down on the brackets.
Respect 48 to 72 hours of drying time. Do not
!
move or manipulate during this period.
During this waiting time, you can fix the roof pass (cf roof pass part).
www.uniteck.fr
EN
11