GadgetMonster GDM-1022 Manual Del Usuario página 7

Example of fully assembled kit.
USB cable
The LED is powered by USB. Connect the USB cable to your phone or
a USB charger for example.
The USB cable has 4 buttons.
1. On/off button = Power the LED on or off.
2. – button = reduce light brightness.
3. S button = change LED mode.
4. + button = increase light brightness.
Battery
The microphone uses battery: CR2 (3V). Replace the battery when
needed.
Microphone
Connect the microphone with the 3.5 mm connector to a phone or
camera.
EST
1.
2.
(1.) Paigalduskruvi kaamerale või telefonihoidikule. Paigaldamiseks
või eemaldamiseks kasutage nuppu.
7