cecotec READYWARM 2000 MAX CERAMIC ROTATE DESIGN Manual De Instrucciones página 35

SYMBOL
0
Depending on the selected power mode, the heater will operate at a certain temperature.
Oscillation
Fig. 4
Turn the oscillation switch on and off to use or not to use the oscillation function.
Off
On
Anti-tilt switch
The heater is designed to turn automatically off when tilted forward or backward. The
-
unit will automatically turn on once it is returned to its normal upright position.
Do not use the heater on thick and long pile carpets, as the heater may not work because
-
the anti-tilt switch is not activated.
Safety system
In the event of abnormal overheating, the safety device automatically switches the
-
appliance off. After a short cooling phase, the device is ready for use again.
If you still observe the same defect mentioned above, disconnect the plug from the
-
socket and consult the official Cecotec Technical Assistance Service.
During use, do not touch or cover the air outlet. This could cause the unit to overheat and
-
the safety device to operate.
4. CLEANING AND MAINTENANCE
Before performing any cleaning operation on the appliance, disconnect it from the mains.
-
Clean the housing with a slightly damp cloth, vacuum cleaner, or dusting brush.
-
Never use flammable or abrasive cleaning agents such as benzene or alcohol to clean the
-
appliance.
FUNCTION
Off
Fan without heating
Low power heating
High power heating
READYWARM 2000 MAX CERAMIC ROTATE DESIGN
ENGLISH
35