INSTRUCTIONS FOR USE
BEFORE USE
Unpack the appliance.
Check that the power supply parameters of the appliance correspond to the parameters of the local
mains.
Main-tenance and Cleaning of this instruction manual.
Before assembling the appliance, make sure that the mixer is disconnected from the mains, and the
speed controller is set to "0".
Attention!
fairly long period of use.
OPERATION
Make sure that the appliance is disconnected from the power source.
Select the desired attachments and insert them into the mixer sockets.
Attention!
Insert suitable attachments into the mixer's sockets. One set of attachments is suitable for kneading
dough and the other is used for beating eggs or similar products.
Attention! Do not put any forks, knives or spoons into the bowl during mixer operation.
after every 5 minutes of continuous use. For best results when mixing batter for yeast-raised cakes, we
recommend that you start mixing at a low speed, then increase it to the maximum speed at the end of
the process.
from the mains.
If residue from mixed products needs to be scraped off a beater or an agitator, use a wooden spatula.
Remove the attachments from the sockets.
USING THE BASE AND AUTO ROTATING BOWL (ACCESSORIES INCLUDED DEPENDING ON
MODEL)
Press the unlock appliance arm button to lift base arm.
Hold the appliance by hand while pressing the main unit anchoring button to remove it.
Fix the accessory as desired on the anchor by matching the hole and ensuring it is properly engaged.
Place the main unit body in the bowl stand and press down until the button returned to is original
position. Press the unlock appliance arm button to return to initial position.
13