Publicidad
Idiomas disponibles
Idiomas disponibles
After the preheating is complete, the buzzer will sound three alerts. At the same time, the preheating
indicator light will change from blinking to on, and the indicator light for adding food will blink to remind
users to add food. After adding the food, press the "Confirm" button and the product will enter the
heating state.The preheating indicator light and the Add food indicator light will be off, and the control
panel will display the chicken heating temperature, as shown in the figure below:
After the heating time of this function is completed, the panel will switch back to Step 2.
5. Manual function operation：
a. When the upper and lower plates have the same temperature: press the Manual Mode button based
on Step 2. The indicators for the manual mode key, the heating key of the upper plate and the heating
key of the lower plate will blink at the same time. The temperature of the upper and lower plates is "-
--". Press the + (-) key to set the temperature of the upper and lower plates synchronously.
Temperature settings range from 80 to 230°C. Every time + (-) is pressed, the temperature increases
(or decreases) by 10°C. After selecting the temperature, press the "Confirm" button, and the machine
will start to heat. When the machine heats to the selected temperature, the buzzer will sound a
warning tone. After reaching the selected temperature, the machine will automatically run for 60
minutes, then exit the manual mode and return to Step 2.
b. When the upper and lower plate temperatures are not the same: press the Manual Mode button based
on Step 2. The indicators for the manual mode key, the heating key of the upper plate and the heating
key of the lower plate will blink at the same time. The temperature of the upper and lower plates is "-
--". At this time, press the heating key of the upper (or lower) disk. The heating key indicator of the
upper (or lower) disk will blink and the heating indicator of the lower (or upper) disk will stay on. At
this time, the product is in the upper (lower) disk state. When using the + (-) key to set the upper (or
lower) disk temperature, the temperature setting range will be from 80°C to 230°C. Every time + (-) is
pressed, the temperature increases (or decreases) by 10°C. After setting the temperature of one disk,
press the "Confirm" button to set the temperature of the other disk. When the temperature of the two
disks is set, the machine will start to heat up. When the machine reaches the selected temperature,
the buzzer will sound a warning tone. After reaching the selected temperature, the product will
automatically run for 60 minutes, then exit manual mode and return to Step 2.
Attention：
• When the - key is used, if the temperature is displayed as "--", it indicates that the baking plates are
not heated at this time.
• Long press the + (or -) key to continuously increase (or decrease) the temperature value.
48
Publicidad
