Haier HRT02WNC Manual Del Usuario página 2

When using this appliance, always exercise basic safety precautions,
including the fdlawing:
1) Use this appliance only for its intended purpose as described in this use
and care guide.
2) This refrigerated cooler must be properly installed in accordance with the
installation instructions before it is used. See grounding instructions in the
installation secfion_
3) Never unplug your refrigerated coder by pulling on the power cord.
Always grasp the plug firmly and pull straight out from the outlet.
4) Repair or replace immediately, all electric service cords that have becorne
frayed or otherwise damaged. Do not use a cord that shows cracks or
abrasion darnage along its length, the plug or the connector end.
s)
6)
7)
Unplug your refrigerated coder before cleaning or before making any
repairs_
Note: If for any reason this product requires service, we strongly recommend
that a cedified technician performs the service.
Do not use any dedrical device or any sharp instrument in defrosting your
refrigerated coolen
If your old refrigerated coder is not being used, we recommend that you
remove the doors and leave the shelves in place. This will reduce the possi-
bility of danger to children.
8) After your refrigerated coder is in operation, do not touch the cold sur-
faces in the refrigerated coder compartment, padicularly when hands
are damp or wet. Skin may adhere to these extremely cold surfaces.
9) This refrigerated coder should not be recessedor buiJtdn an endosed cabi-
net. It is designed for freestanding installation only_
10) Do not operate your refrigerated coder in the presence of explosive
furnes_
11) It is not recornrnended to store foods which rnust be kept at below 40 ° F
for safe storage_ This includes most dairy, meat and risk
SAVE THESE INSTRUCTIONS