Alsafix ALAIR 10/200 OILESS Manual De Utilización página 30

The compressor does not stop.
- If the compressor does not stop when the maximum pressure is reached, the chamber safety valve
is activated. To repair the valve, contact the ALSAFIX After-Sales Service.
IMPORTANT
- Never unscrew any connections when the chamber is pressurised.
- Always check whether the chamber is depressurised.
- Only carry out work on the compressor when the power supply has been disconnected.
- The temperature at the service location: 0 °C to +40 °C.
- Do not point spraying nozzles or flammable liquids towards the compressor.
- Do not place flammable objects near the compressor.
- During stoppage periods, move the pressure switch to the "0" position (disconnected).
- Do not direct the air jet towards other people or animals.
- Do not transport the compressor while the chamber is pressurised.
- Take care with certain compressor parts such as the front end and discharge pipes, as they are capa-
ble of reaching high temperatures. Never touch these parts as there is the risk of burning.
- Transport the compressor by lifting or pulling it with the correct handles or levers.
- Keep children and animals away from the machine's working area.
- If the electric power supply or the cable is damaged, do not use the compressor and contact an autho-
rised service centre in order to replace the faulty element by a genuine spare part.
- If the compressor is placed on a shelf or above the height of the floor, it must be fixed in place to pre-
vent it from falling while it is in operation.
- Do not place objects or hands inside the protective grill so as to avoid bodily injury or damage to the
compressor.
- Never use the compressor as a blunt object directed towards other objects or animals in order to pre-
vent serious damage.
- When work on the compressor has finished, always remove the power plug.
- Never carry out welding work on the chamber.
- Never attempt to compress anything but air.
- Do not place the device in a corrosive area.
PNEUMATIC CONNECTIONS
Always use pneumatic pipes for compressed air with the maximum pressure characteristics that are
correct for the compressor.
30