Publicidad
Idiomas disponibles
Idiomas disponibles
FAR AWAY FROM BATTERY AS POSSIBLE, THEN
CONNECT THE NEGATIVE (BLACK) CHARGER CLIP TO
FREE END OF CABLE;
1. Connect the POSITIVE (red) charger clip to the POSITIVE
(POS, +) post of the battery.
2. Connect the NEGATIVE (black) charger clip to the
NEGATIVE (NEG, -) post of the battery.
3. Connect the AC supply cord to the electrical outlet.
4. When disconnecting the charger, always do so in the
reverse order of the connecting procedure and break the first
connection while as far away from the battery as practical.
NOTE that a marine battery must be removed and charged on
shore. To charge it onboard requires equipment specially
designed for marine use.
AC CONNECTIONS
1. This battery charger is for use on 110-120 Vac. Check your
AC volt and make sure the version you take is correct.
2. The plug must be plugged into an outlet that is properly
installed and grounded in accordance with all local codes
and ordinances.
3. The plug pins must fit the receptacles. Do not use
with an ungrounded system.
4. Never alter AC cord or plug provided. If it does not fit the
outlet, have prosper grounded outlet installed by a qualified
electrician. Improper connection can result in a risk of an
electric shock or electrocution.
- 11 -
Publicidad
