Publicidad
Idiomas disponibles
Idiomas disponibles
1. TECHNICAL SPECIFICATIONS
Model
Voltage
Frequency
Power
No load speed
Chuck Size
Steel/Concrete/Wood
2. GENERAL SAFETY RULES
Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the warnings listed below refers to your main
operated (corded) power tool or ba ery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep work area clean and well lit. Clu ered or dark areas invite accidents.
• Do not operate power tools in explosive atmosphere, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
• Do not abuse the cord. Never use the cord carrying, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cord increase the risk of
electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor can reduce the risk of electric shock.
• Do not use AC only rated tools with a DC power supply. While the tool may appear to work, the
electrical components of the AC rated tool are likely to fail and create a hazard to the operator.
• If operating the power tool in damp locations is unavoidable, a Ground Fault Circuit Interrupter (GFCI)
must be used to supply the power to your tool. GFCI and personal protection devices like electrician's
rubber gloves and footwear will further enhance your personal safety.
eZID550
eZ750ID-C
220-240 V
220-240 V
50-60 Hz
50-60 Hz
500 W
0-2700 rpm
0-2800 rpm
13 mm
Max drilling capacity
10/13/20 mm
10/13/25 mm
5
eZ850ID-C
220-240 V
50-60 Hz
850 W
710 W
0-3000 rpm
13 mm
13 mm
13/13/32 mm
eZ1050ID-C
220-240 V
50-60 Hz
1050 W
0-3200 rpm
13 mm
13-8/ 20-13/
40-25 mm
Publicidad
