Publicidad
Idiomas disponibles
Idiomas disponibles
PERSONAL SAFFETY
• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use
a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of
ina ention while operating power tool may result in serious personal injury.
• Use safety equipment. Always wear protection. Safety equipment such as dust mask, nonskid safety
shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
• Avoid accidental starting. Ensure the switch is in the o -position before plugging in. Carrying power
tools with your finger on the switch or plugging in power tools that have the switch on invites
accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key le a ached
to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables be er control of the
power tool in unexpected situation.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• If devices are provided for the condition of dust extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can reduce dust-related hazards.
• Keep handles dry, clean and free from oil and grease. Slippery hands cannot safely control the power
tool.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job be er and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and o . Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the ba ery pack from power tool before making
any adjustments, changing accessories, or storing power tools, such preventive safety measures reduce
the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool. Power tools are dangerous in the hands of
untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may a ect the power tools operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
• Keep cu ing tools sharp and clean. Properly maintained cu ing tools with sharp cu ing edges are less
likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the
manner intended for the particular type of power tool, taking into account the working condition and
the work to be performed. Use of the power tool for operation di erent from those intended could
result in a hazardous situation.
• Use clamps or other practical way to secure and support the work piece to a stable platform. Holding
the work by hand or against your body is unstable and may lead to loss of control.
• Empty dust container frequently, especially when sanding wood with polyurethane, varnish, shellac or
similarly coated surface. Fine particles of sanding dust may self ignite and cause fire.
SERVICE
• Have your power tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
• Develop a periodic maintenance schedule for your tool. When cleaning a tool be careful not to
disassemble any portion of the tool since internal wires may be misplaced or pinched or safety guard
6
Publicidad
