Boneco W400 Instrucciones De Uso página 36

36
CLEANING THE APPLIANCE
en
DISASSEMBLY AND CLEANING
1. Take off the upper part of the BONECO W400.
2. Remove the drum with the AW200 evaporator
mat.
3. Take out the A7017 Ionic Silver Stick
4. Turn both drum discs to release them. In doing
so, observe the markings on the outer side of the
disc.
5. Remove the AW200 evaporator mat from the
drum.
6. Clean the water base and the drum either by
.
®
hand or in the dish washer at a max. temperature
of 50 °C.
7. Clean the inside of the water tank by hand or with
a suitable cleaning brush using a commercially
available dish detergent.
8. Clean the water tank cover with a commercially
available dish detergent and a cleaning brush.
9. Put the BONECO W400 back together by following
the steps in reverse order.