Charge Amps Amp Guard Guía Rápida página 15

Technical data
Measuring range (current)
Measuring range (voltage)
Network
Power supply
Installation
Dimensions (W x D x H)
Current sensor cable length*
*Must not be tampered with to
maintain measurement accuracy.
Maximum cable diameter for
current sensors
Rated secondary current for
current sensors
PMD classification
± 0-63 A
85-256 VAC, single to 3-phase, 50 Hz
LAN, Wi-Fi 802.11b/g/n 2.4 GHz
Freq. range: 2400-2500 MHz
Max power output: 20 dBm
Rated voltage: 12 VDC 0.5 A, provided by the
supplied 230 VAC (+/-15%)
50 Hz power supply
DIN rail mounting in a cabinet:
1M for Charge Amps Amp Guard
1M for power supply
Charge Amps Amp Guard:
17.5 x 73* x 100 mm
Power supply:
17.5 x 58 x 90 mm
*86 mm with Wi-Fi antenna (measured from DIN
rail).
80 cm
10 mm
30(36) mA
PMD-x, I and U, SD, Kx
English
15